ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
12
2.4 Instructions for special types of risks
2.4.1 Electrical energy
Only use original fuses with specific current rating! For faults in the electrical supply, switch
off the system immediately!
Working on electrical equipment or operating equipment must only be done by an
electrician or trained persons under the guidance and supervision of an electrician
according to the electrotechnical regulations.
The power to system parts, on which inspection, service and repair work is performed, must
be switched off, if so specified. First check the parts that are switched off if there is no
voltage, then ground and short-circuit as well as insulate adjacent live parts!
The electrical equipment of the system must be inspected and checked regularly. Defects
such as loose connections or scorched cables must be rectified immediately.
If work is required on live parts, a second person who can activate the emergency- off- or
main switch in case of emergency needs to get involved. Block off the work area with a red
and white safety chain and a warning sign. Only use voltage insulated tools.
2.5 Declaration of Conformity
The Declaration of Conformity must be presented in both German and English.
To Next Page
Loading...