ProTec Polymer Processing FG 204 - Dimensions and Electrical Data (FG 205-206)

ProTec Polymer Processing GmbH Foerdergeraet_FG201-FG206_BA_1v0_2018_en
17
3.3.1 Dimensions
FG 205
H1 with/without volume expansion: 585 / 785 mm
H3 (for filter change) min. 200 mm
FG 206
H1 with/without volume expansion 785 / 985 mm
H3 (for filter change) min. 400 mm
FG 205.x/3x
H1 without volume expansion 515 mm
H1 with volume expansion 775 mm
H3 (for filter change) min. 200 mm
FG 206.x/3x
H1 without volume expansion 715 mm
H1 with volume expansion 975 mm
H3 (for filter change) min. 400 mm
FG 205.x/4x
H1 without volume expansion 575 mm
H1 with volume expansion 835 mm
H3 (for filter change) min. 200 mm
FG 205 and FG 206
h1 with/without volume expansion 210 / 410 mm
d1 38 mm
d1 with volume expansion VA 38 or 55 mm
FG 206.x/4x
H1 without volume expansion 775 mm
H1 with volume expansion 1,035 mm
H3 (for filter change) min. 400 mm
FG 205 and FG 206
h1 with/without volume expansion 180 / 380 mm
d1 38 mm
d1 with volume expansion VA 38 or 55 mm
3.3.2 Electrical data
Mains connection 1/N PE AC 50/60Hz 230V
Blower rated output 800 W
Control magnet rated output 400 VA
Current consumption 4 A
Protection class IP 20