N 93-531-79 ISSUE 1 NH Page 5 of 32 © Protec Fire Detection PLC 2012
1.0 Important Notes – PLEASE READ CAREFULLY
• The 6100 fire alarm control panel and its associated connections must be installed,
commissioned and maintained by a suitably skilled and competent person.
• It is assumed that the person commissioning the system is aware of fire alarm equipment
terminology and terms of reference.
• This equipment must be earthed.
• This equipment is not guaranteed unless installed and commissioned in accordance with current
national standards.
• This equipment has been designed and manufactured to conform to the requirements of all
applicable EU council directives.
• Both the 6100 User manual, 6100 Installation and Commissioning manual and this manual must
be thoroughly read and understood before programming is undertaken.
• This equipment WILL NOT operate as a fire alarm panel when the USB port is connected and the
panel is connected to a PC.
• This equipment is not suitable as part of an I.T type power distribution system as defined in
IEC 60364-3.
• There are no user serviceable parts inside the 6100 panel. A competent person trained to
undertake such work MUST carry out any internal maintenance work.
The policy of Protec Fire Detection plc is one of continuous improvement and as such we reserve the right to
make changes to product specifications at any time and without prior notice.
Errors and omissions excepted.
To Next Page
Loading...
