Chapter 4 Award BIOS Setup
PS3100 SERIES USER
′
S MANUAL
Page: 4-9
CPU FEATURE:
The options for these items are found in its sub menu. By pressing the
<ENTER> key, you are prompt to enter the sub menu of the detailed options
as shown below:
Phoenix – Award CMOS Setup Utility
CPU Feature
Item Help
Delay Prior to Thermal
Limit CPUID MaxVal
C1E Function
Execute Disable Bit
[16 Min]
[Disabled]
[Disabled]
[Enabled]
Menu Level ►
↑↓→←:Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Descriptions on each item above are as follows:
1. DELAY PRIOR TO THERMAL:
The Delay Prior To Thermal BIOS feature controls the activation of the
Thermal Monitor's automatic mode. It allows you to determine when the
Pentium-M’s Thermal Monitor should be activated in automatic mode
after the system boots.
2. LIMIT CPUID MAXVAL:
The CPUID instruction of some CPUs will return a value greater than
3.If you are using Windows operating system. Please disable this
feature.
3. C1E FUNCTION:
This is enabled to reduce power during idle operation.
4. EXECUTE DISABLE BIT:
To select enable or disable the No-Execution Page Protection
Technology.
To Next Page
Loading...
