Proteus PSS-2015C - Stack Shroud Assembly; Weight Shroud Bracket Attachment; Mounting the Weight Shroud

STACK SHROUD ASSEMBLY
1.) REMOVE BOLTS ( 2 ) AND WASHERS ( 22 ) FROM THE ATTCHMENTS OF SLIDER
TUBES ( F ) TO BOTH BASH BASE TUBE ( D ) AND TOP TUBE ( B ) , THEN.
ASSEMBLE WEIGHT SHROUD BRACKETS ( S - b ) , ONTO BOTH BASE TUBE ( C )
& TOP TUBE ( A ) , RE - FASTEN THE BOLTS ( 1 ) AND WASHERS ( 13 ).
2.) ASSEMBLE WEIGHT SHROUD ( S - a )ONTO WEIGHT BRACKET ( S - b ) , FIX BOLTS
( S - c ) AND WASHERS ( S - d ).
S-a
S-c
S-d
S-c
S-a
S-b
REMOVE & FASTEN BACK
BOLTS ( 2 ) & WASHERS ( 22 )
STUDIO - 2000 HOME
GYM TOP TUBE ( B )
S-a
S-c
S-c
S-d
S-d
S-c
S-a
S-c
S-d
S-b
REMOVE & FASTEN BACK
BOLTS ( 2 ) & WASHERS ( 22 )
STUDIO - 2000 HOME
GYM BASE TUBE ( D )
-22-