Protimeter MMS2 User Manual

18 INS8800 Rev. D
Protimeter MMS2 Instruction Manual
4.7e Buzzer On-Off
This option is used to switch the Buzzer ON/OFF. When the Buzzer is ON:
• Any key press will make a beep sound.
• In WME/Aquant mode, a RISK/WET condition will be alerted.
• Instrument turn ON/OFF will be indicated
Navigate to
SELECT MODE -> SETTINGS -> BUZZER ON-OFF and press to
switch the Buzzer on/off.
Use / to navigate between the on and off options and press to
save the desired configuration.
4.7f Calibration
The Calibration option is unavailable to the user.

Protimeter MMS2 Specifications

General

Measurement Modes	Pin, Non-Invasive, Humidity, Temperature
Depth of Measurement (Non-Invasive)	Up to 3/4 inch (19 mm)
Humidity Measurement Range	0% to 100% RH
Temperature Measurement Range	-4 to 140 °F (-20 to 60 °C)
Accuracy (Relative Humidity)	±2% RH
Accuracy (Temperature)	±0.5 °C
Display	LCD