Proton InteliSENS PD30 - Optional Communications Interfaces

Page 42 of 68
Proton Products InteliSENS PD30 Instruction Manual (Issue 1a)
OPTIONAL COMMUNICATIONS INTERFACES
WIFI WIRELESS COMMUNICATIONS
This communications interface operates independently of the other communications interfaces and
may be used at the same time as them.
WiFi interface
Connector type: SMA female (install the supplied 2.4 GHz antenna on this connector).
PROFIBUS COMMUNICATIONS
This communications interface operates independently of the other communications interfaces and
may be used at the same time as them.
PROFIBUS interface
The PROFIBUS interface may be accessed through the “PROFI/EIP/DEV” connector.
Connector type: DB9 female (socket)
Pin
PROFIBUS
Comments
3
B
4
RTS
5
GND
6
+5V
8
A
S
Shield
Ensure that the cable shield is connected to this via the plug shield connection.
PROFIBUS LED indicator
i-BUS
LED status
Indication
Continuous green
Online
PROFIBUS communications
Continuous red
Communication error
Extinguished
No communication