ProVisual H Series - Provisual Dvr-412-Aqh; Dvr-824-Aqh; Dvr-1648-Aqh; Provisual Dvr-400-Aqh; Provisual Dvr-16214-Aqh

56
ProVisual VH Series DVR
NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576)
8 Channel DVR
240 (200) 240 (200) 240 (200)
16 Channel DVR
480 (400) 480 (400) 480 (400)
-HD-SDI Type-
ProVisual DVR-412-AQH / DVR-824-AQH / DVR-1648-AQH
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel DVR
120(100) 120(100) 120(100) 60 30
8 Channel DVR
240(200) 240(200) 240(200) 120 60
16 Channel DVR
480(400) 480(400) 480(400) 240 120

ProVisual DVR-400-AQH
360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
4 Channel DVR
120(100) 120(100) 120(100) 120 100
8 Channel DVR
240(200) 240(200) 240(200) 240 200
16 Channel DVR
480(400) 480(400) 480(400) 480 400
ProVisual DVR-16214-AQH
 HD-SDI Input (CH 1~2)

360x 240(288) 720x240(288) 720x480(576) 1280 x 720 1920 x 1080
2 Channel
60(50) 60(50) 60(50) 60 50

Analog Input (CH 3~16)
NTSC(PAL) 360x240 (360x288) 720x240 (720x288) 720x480 (720x576)
14 Channel
420 (350) 420 (350) 210 (175)
 Click ( ) each frame on ‘Quality’ column to select recording quality of a corresponding camera. User may select its
recording quality from Super, High and Std.
 Click ( ) each frame on ‘Duration’ column to select recording duration (i.e., 1 second ~3 hours) of a corresponding camera.
 User may change the setting values of Resolution, Frames, Quality and Duration at a time by clicking the menu tab.
 Choose ‘OK’ to confirm the setting.
CAUTION
If the HD-SDI input signal is 1080p, then the frame resolution of 360 x 240, 720 x 240 and 720 x 480 are decreased in half.