Proxim Tsunami 8000 series User Manual

Advanced Configuration
Tsunami
®
800 & 8000 Series - Software Management Guide 117
5.4.5.4 Configurable Parameters on an SU
To configure the roaming parameters on an SU, navigate to ADVANCED CONFIGURATION > Wireless > Interface 1 >
Roaming. The Roaming Configuration screen appears:
Figure 5-42 SU Roaming Configuration
Below is the table which explains roaming parameters for an SU, and the method to configure the configurable parameter(s):
Parameter Description
Roaming Status By default, roaming status is disabled. Only when enabled, an SU can roam to a better
BSU.
: Roaming on the SU can be enabled independent of the roaming status on the BSU.
The roaming parameters such as Rx SNR Thresholds for Slow and Fast Roaming are
configurable only when the roaming status is enabled.

Proxim Tsunami 8000 series Specifications

General

Brand	Proxim
Model	Tsunami 8000 series
Category	Network Router
Language	English