Proxim Tsunami 8000 series User Manual

Device Initialization
Tsunami
®
800 & 8000 Series - Software Management Guide 31
·
Switch between the network adapters, if there are multiple network adapters in the Personal Computer
:
·
IPv6 is supported only by ScanTool v3.0.1 and higher versions.
·
Network Adapter of ScanTool supports up to 16 virtual / real interfaces
·
Disable Windows Firewall (or add an exception) for ScanTool to function or to detect the radio.
3.1.2 Initialize Device by using ScanTool
To scan and locate the devices on a network by using ScanTool, do the following:
1. Power on, or reset the device.
2. To download Proxim’s ScanTool, log on to Proxim’s support site at
        j           
and search for ScanTool with
(Answer ID 1735). Upon successful download, double-click the icon to start the ScanTool.
3. If there are more than one network adapter installed on the computer, then the user will be prompted to select the
adapter for scanning Proxim devices. Use either an Ethernet or a Wireless Adapter. Select an adapter and click OK. The
following Scan List screen appears, which displays all devices that are connected to the selected adapter.
Figure 3-1 Scan List - Scanned Devices (IPv4)
Figure 3-2 Scan List - Scanned Devices (IPv6)

Proxim Tsunami 8000 series Specifications

General

Brand	Proxim
Model	Tsunami 8000 series
Category	Network Router
Language	English