Installation and Operating Instructions
SDC 204 1316BED035-10B-E Date 12/06
- 2 -
The described appliance has been made and tested in compliance with CE-guidelines.
1 SAFETY INSTRUCTIONS 3
2 SYMBOLS AND ABBREVIATIONS 4
3 DEVICE DESCRIPTION 5
3.1 Usage 5
3.2 Device features 5
4 SYSTEM DIAGRAMS 6
4.1.1 Over voltage protection 7
5 DEVICE INSTALLATION 8
5.1 Opening the device (only by qualified personnel) 8
5.2 Wall mounting 9
6 ELECTRICAL CONNECTION 10
6.1 230 V connections 11
6.1.1 Overview: 230 V connections for Solareg Vision Plus 11
6.2 Attachment of temperature sensor 11
7 OPERATION / INDICATORS 13
7.1 Overview of displays and operating controls 13
7.2 Display – maximum display 14
7.3 Explanation of graphic symbols 14
7.4 Example of device operation 17
8 MENU STRUCTURE 18
8.1 Overview 19
8.2 “Info” menu 20
8.3 “Program” menu 21
8.4 “Manual operation” menu 22
8.5 “Basic settings” menu 22
9 CONTROLLER FUNCTIONS 24
9.1 General control functions 24
9.1.1 Load storage cylinder 24
9.1.2 Systems with two storages 25
9.1.3 Rotating speed controller 25
9.1.4 Independant controller 25
9.1.5 Thermostat (cooling) 26
9.1.6 Thermostat (heating) 26
9.1.7 Temperature difference control 27
9.1.8 Tube collector 27
9.2 System monitoring 28
9.2.1 Sensor monitoring 28
9.2.2 Flow monitoring 28
9.2.3 Collector protection / Re-cooling 29
9.2.4 System protection function 29
9.2.5 Frost protection 29
9.3 Additional functions 30
9.3.1 Yield estimation / yield metering 30
9.3.2 Engine-hour meter 30
10 RECTIFICATION OF FAULTS 31
10.1 Faults with error message 31
10.2 Faults without error message 32
11 TECHNICAL DATA 33
12 RESISTANCE TABLE PT1000 33
13 LIMITED WARRANTY 34
To Next Page
Loading...
