Page | 12
3.1 LIST OF EQUIPMENT AND CUSTOMER INFORMATION
Carefully unpack the carton. You should have received the following items:
• FluorPen/Monitoring Pen
• Carrying Case
• Textile Strap for Comfortable Wearing
• FluorPen Operating Manual (on a USB flash disc)
• FluorPen software and driver (on a USB flash disc)
• USB cable
• Self-Adhesive Rubber Pads for Optics Protection (FP 110/S only)
• Detachable Leaf-clips (FP 110/D only and sold separately)
Other Accessories or Optional Features (according to your specific order)
For data download via USB connection, the USB driver needs to be installed on the PC. It can be found on the
installation disk (USB driver folder).
If any item is missing, please, contact the manufacturer. Also check the carton for any visible external damage. If
any damage is found, notify the carrier and the manufacturer immediately. The carton and all packing materials
should be retained for inspection by the carrier or insurer.
For customer support, please write to: support@psi.cz
3.2 CARE AND MAINTENANCE
FluorPen and Monitoring Pen
• Never submerge the device in water! (except Monitoring Pen MP 100-A).
• The device should not come in contact with any organic solvents, strong acids or bases.
• Keep the optical part clean and dry. If cleaning is needed, use soft, non-abrasive tissue.
• Battery charge lasts approximately 48 hours when the FluorPen is operated continuously.
• If the battery can no longer be charged please contact PSI for replacement battery and installation instructions.
Li-ion battery
• Avoid fully discharging of the battery.
• Do not keep the battery at full charge for all the time.
• Keeping at high temperatures shortens battery life.
To Next Page
Loading...
Need help?
General
