PSI FluorPen FP 110 - DATA TRANSFER AND VISUALIZATION

Page | 46
9.4 FIRMWARE UPDATE
All data in the FluorPen memory are erased during the firmware update!
Before starting any firmware update, download all your data from the FluorPen memory to the computer!
1. Starting Update
• Select: Setup > Update Firmware From File (Fig. 29).
Fig. 29 Firmware Update.
2. Warning
• Select: OK to start update (Fig. 30)
3. Selecting .bxn file
• Find: firmware update file: Binary file (with the extension .bxn) (Fig. 31).
• Select: Open.
Fig. 30 Warning.