Page | 41
9.2.2 MENU SETTINGS
MENU > Setup > Settings (Fig. 21)
After Download – Memory Erase
If the box is checked the FluorPen memory is erased after each data
download.
Data – Inverted
If the box is checked the polarity of data is inverted, e.g., multiplied by -1.
This feature can be helpful for a certain type of experiment when the
measured data are undesirably interpreted as negative values.
Data – Add to opened
If the box is checked the downloaded data are added to that of the current
opened experiment.
Data – GPS Visible
This option is active only in older FluorPen version FP 100 and Monitoring
Pen MP 100. In new version FP 110 the GPS data are automatically
downloaded and paired with protocol measurements.
Graf – Single
If the box is checked all measured data are visualized in one graph, i.e., the value of each new measurement is added to the currently
used graph window.
If the box is not checked a new graph is opened for every new measurement.
9.2.3 MENU ONLINE CONTROL
This function can be used for Online Control the FluorPen device after connection with the PC.
• Select: Menu > Device > Online Control
Online Control – Switches (Fig. 22)
Sound On/Off – select presence of sound - device beeping when pressing
MENU and SET keys.
Multi use averaging (YES/NO) – serves to confirm Multi Repeats (number of
repetitions) and Multi Interval (time between measurements). Settings for
each measurement within Multi Option preset by the user on the FluorPen
device or in the software under Values tab (see below)– select YES or NO.
To Next Page
Loading...
Need help?
General
