PSI FluorPen FP 110 Instruction Guide

Page | 9
Monitoring Pen
Protocols
Ft – instantaneous chlorophyll fluorescence
Quantum Yield
OJIP
Non-photochemical quenching
Light curve
LED emitter
Blue (470 nm), other wavelengths on request
Saturating pulse Illumination
Up to 3,000 µmol(photon).m
-2
.s
-1
(adjustable from 10 to 100%)
Actinic Illumination
Adjustable from 10 to 1,000 µmol(photon).m
-2
.s
-1
Measuring Illumination
Up to 0,09 µmol(photon).m
-2
.s
-1
per pulse (adjustable from 10 to 100%)
Detector
PIN photodiode with bandpass filters
Wavelength range from 667 to 750 nm
Internal memory capacity
Up to 16 Mb
Internal data logging
Up to 149,000 measurements (depending on protocol)
Data transfer
Serial cable
PC software
FluorPen 1.1 (Windows 7 and higher)
External Battery
Standard battery pack
operating temperature from 10 to 40 °C
rechargeable
Extended temperature range battery pack
operating temperature from -40 to 60 °C
non-rechargeable (spare battery)
Capacity 12Ah
Battery life up to 2 years of operation (1 QY measurement per hour)
Sample holder
Probe
Display
2 x 8 characters LC display
Keypad
Sealed, 2-key tactile response
Turns off after 5 minutes of no use
Built in GPS module
Ultra-high sensitivity down to -165dBm
High accuracy of <1.5 m in 50% of trials
Size
134 x 65 x 33 mm
Weight
188 g
Warranty
1-year parts and labor

PSI FluorPen FP 110 Specifications

General

Brand	PSI
Model	FluorPen FP 110
Category	Measuring Instruments
Language	English