Chapter 2: Introduction
20
Sixteen-Port MPS1000
A 16-port MPS1000 has the following attributes:
• 16 high-speed WAN ports - up to 2.0 Mpbs bi-directional, simultaneously
• Two 10/100 Base-T Ethernet ports
• Two 233 MHz Motorola MPC8255 PowerQUICC II processors
• Two x 128 MB shared DRAM
• Two x 32 Mbyte application flash PROM
• Two x 512 KBytes boot PROM
• SNMP (Basic MIB II) support allowing MIB Browser or SNMP management of the server
System Features and Capabilities
Each MPS1000 is a 1U-high WAN-LAN data communications server that attaches to your
local-area network to provide wide-area connectivity. The MPS1000 contains one or two
CPC358s, octal synchronous serial communication processors, which can be preloaded with
one or more protocols.
For more information about the CPC358 or RTM258, refer to the CPC358 Octal Synchronous
Serial Communications Processor Hardware Manual.
Models and Accessories
Table 2-1, “PTI Part Numbers for MPS1000 Versions and Accessories,” on page 21 lists the
PTI RoHS part numbers for the MPS1000 versions and accessories required to operate the
server.
This manual covers both RoHS and Non-RoHS versions of the MPS1000. See “Compliance
with RoHS and WEEE Directives,” on page 31 for information about RoHS compliance.
Note: Refer to the Performance Technologies Web site to find the non-RoHS part Numbers for
some of these products if needed:
http://pt.com/page/about-us/ehsms/rohs-compliant/
To Next Page
Loading...