Chapter 3: Technical Information
30
Regulatory Information
FCC (USA) Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
Note: Modifications made to this device that are not approved by Performance Technologies,
Inc. may void the authority granted to the user by the FCC to operate this equipment.
Industry Canada Class A Notice
This Class A digital apparatus complies with Industry Canada’s Equipment Standard for Digital
Equipment (ICES-003).
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Product Safety Information
Safety Precautions
This section is provided as a summary of the safety recommendations throughout this manual.
Performance Technologies recommends that all safety precautions be followed to prevent
harm to yourself or to the equipment. Please follow all warnings marked on the equipment.
Ensure that the voltage and frequency of your power source matches the voltage and
frequency inscribed on the equipment's electrical rating label.
Never push objects of any kind through the openings in the equipment. Dangerous voltages
may be present. Conductive foreign objects could produce a short circuit that could cause
fire, electrical shock, or damage the equipment.
To Next Page
Loading...