Chapter 3: Technical Information
28
Operating and Storage Conditions
The operating conditions for the MPS1000 are based upon the requirements defined in the
following tables.
Do not restrict air flow through the vents.
Temperature
The MPS1000 should be installed in a location that allows airflow through the front, rear, and
side of the unit. Temperature requirements are shown in Table 3-1, “Ambient Temperature
Requirements,”.
Humidity
Humidity requirements are shown in Table 3-2, “Humidity Requirements,”.
Altitude
The MPS1000 is designed to meet the requirement outlined in the NEBS GR-63 specification
with regard to Altitude.
Table 3-1:Ambient Temperature Requirements
Operation Minimum Maximum
Operating 0°C (32° F) 50°C (122° F)
Storage -40°C (-40° F) 70°C (158° F)
Table 3-2:Humidity Requirements
Operation Minimum Maximum
Operating 10% 85%
Storage 10% 85%
To Next Page
Loading...