Pulsar 200 NS User Manual

6. Parking the Vehicle :
6.1 Parking using center stand.
• Center stand is available as accessories
at dealership.
• Support the motorcycle on a firm level
surface with the center stand.
6.2 Parking using side stand.
• Support the motorcycle on a firm level
surface with the side stand.
• Lock the steering.
7. Running IN
Proper running-in is important for the better
life & trouble free performance of the vehicle.
• During first 2000 kms running-in period do
not exceed following speed limits.
• Always keep the speed below the limits
mentioned in the table.
• Do not race the engine excessively.
• Do not start moving or race the engine
immediately after starting. Run the engine
for a minute at idle speed to give the oil a
chance to workup into the engine.
Kms 1st 2nd 3rd 4th 5th 6th
0 - 1000 10 18 24 32 40 48
1000 - 2000 16 24 30 38 46 54
CAUTION : Do not park on a soft or
steeply inclined surface or the motorcycle
may fall over.
How to Ride Your Bike
21

Pulsar 200 NS Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Fuel Injection
Rear Suspension	Nitrox mono shock absorber with Canister
Front Brake	280 mm Disc
Rear Brake	230 mm Disc
Fuel Tank Capacity	12 liters
Bore x Stroke	72 mm x 49 mm
Clutch	Wet multi-plate
Front Tyre	100/80-17
Rear Tyre	130/70-17
Length	2017 mm
Width	804 mm
Wheelbase	1363 mm
Ground Clearance	167 mm
Seat Height	805 mm
Engine Type	4-stroke, SOHC 4-valve, Liquid Cooled, Triple Spark
Max Torque	18.3 Nm @ 8000 rpm
Front Suspension	Telescopic forks
Frame Type	Perimeter Frame
Height	1195 mm