Pulsar 200 NS User Manual

Engine : 4 Stroke, Single Cyl.
Bore x Stroke : 72.0 mm x 49.0 mm
Engine Displacement : 199.5 cc
Compression Ratio : 11 : 1
Idling Speed : 1350 ~ 1450 RPM
Max. Net Power : 23.5 PS at 9500 RPM
Max. Net Torque : 18.3 Nm at 8000 RPM
Ignition System : DC
Spark Plug : 3 Nos
Spark Plug Gap : 0.7 ~ 0.8 mm
Transmission : 6 speed constant
mesh
Gear Shifting Pattern : 1 Down 5 Up
Engine Lubrication : Pressurized oil supply
Engine Cooling : Water cooling
Starting Aid : Electric starter
Front Brake : Hydraulic Disc type
Rear Brake : Hydraulic Disc type
Fuel Tank Capacity
Full : 12 liters
Usable Reserve : 2.4 liters
Unusable Reserve : 0.2 liters
Dimensions :
Length : 2017 mm
Width : 804 mm
Height : 1195 mm
Wheel base : 1363 mm
Ground clearance : 167 mm
Tyre Size
Front : 100/80-17,52P tubeless
Rear : 130/70-17,61P tubeless
Tyre Pressure
2
Front : 1.75 kgf/cm (25 PSI)
2
Rear (Solo) : 2.00 kgf/cm (28 PSI)
2
Rear (with pillion) : 2.25 kgf/cm (32 PSI)
Technical Specifications
1

Pulsar 200 NS Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Fuel Injection
Rear Suspension	Nitrox mono shock absorber with Canister
Front Brake	280 mm Disc
Rear Brake	230 mm Disc
Fuel Tank Capacity	12 liters
Bore x Stroke	72 mm x 49 mm
Clutch	Wet multi-plate
Front Tyre	100/80-17
Rear Tyre	130/70-17
Length	2017 mm
Width	804 mm
Wheelbase	1363 mm
Ground Clearance	167 mm
Seat Height	805 mm
Engine Type	4-stroke, SOHC 4-valve, Liquid Cooled, Triple Spark
Max Torque	18.3 Nm @ 8000 rpm
Front Suspension	Telescopic forks
Frame Type	Perimeter Frame
Height	1195 mm