Pulsar 200 NS User Manual

Brake Fluid
Front & Rear Brake Fluid Level
• Front brake fluid reservior is located on RH
side of Handle bar.
• Rear brake fluid reservior is located behind
RH pillion holder bracket.
• To check oil level, Park vehicle
perpendicular to the ground on level surface
as mentioned in page no. 21 (6.1) with
handle bar in straight ahead condition
• Always ensure that brake fluid level is above
‘MIN’ mark given on inspection Window.
Brake Fluid Replacement
• Check & Adjust brake fluid level in every
service.
• Change the brake fluid of the front & rear
brake according to service schedule.
Use only DOT-3 ro DOT-4 brake fluid (from
sealed container) for top up & replacement.
Front
Brake
Fluid
Reservior
Rear
Brake
Fluid
Reservior
31

Pulsar 200 NS Specifications

General

Displacement	199.5 cc
Transmission	6-speed
Fuel System	Fuel Injection
Rear Suspension	Nitrox mono shock absorber with Canister
Front Brake	280 mm Disc
Rear Brake	230 mm Disc
Fuel Tank Capacity	12 liters
Bore x Stroke	72 mm x 49 mm
Clutch	Wet multi-plate
Front Tyre	100/80-17
Rear Tyre	130/70-17
Length	2017 mm
Width	804 mm
Wheelbase	1363 mm
Ground Clearance	167 mm
Seat Height	805 mm
Engine Type	4-stroke, SOHC 4-valve, Liquid Cooled, Triple Spark
Max Torque	18.3 Nm @ 8000 rpm
Front Suspension	Telescopic forks
Frame Type	Perimeter Frame
Height	1195 mm