Pulsar 200 NS - Speedometer Settings; Trip Meter and Service Reminder Reset

S
M
Set
Mode
TRIP 1/2
2. Service Reminder Reset ( ) :
• ‘Wrench’ symbol glows when ODO meter reading
reached to set Kms.
1. Trip Meter Reset :
• Mode & Set push button is provided for selecting &
resetting ‘ODO/TRIP1/TRIP2’. LHS part of speedo
console.
1.
Press mode push button
for less than 2 sec.
Press set push button
for more than 15 sec.
Mode changes from
‘ODO/TRIP1/TRIP2’
Selected mode
‘TRIP1/TRIP2’ will reset.
Other TRIP mode will
continue updating.
2.
1.
Press mode push button
for less than 2 sec. &
select Trip2.
Press mode & set button
for more than 5 sec.
Continuously.
Trip2 Mode selected
Service reminder icon will
be resetted.
2.
Note : Engine & motorcycle speed should be zero.
Speedometer Setting
10