Pulsar FlowCERT LITE - Page 85

Page 77
Alarm ID
Description
Setpoints
6= In bounds
Relay goes “ON” if
value is inside the zone
between the two
setpoints.
Relay Setpoints,
P213, 223, 233,
243, 253 and P214,
224, 234, 244, 254
can be set in any
order as the unit
‘knows’ that you
are setting an in
bounds alarm.
7= Out of bounds
Relay goes “ON” if
value is outside the zone
between the two
setpoints.
Relay Setpoints
P213, 223, 233,
243, 253 and P214,
224, 234, 244, 254
can be set in any
order as the unit
‘knows’ that you
are setting an out
of bounds alarm.
When P211, 221, 231, 241, 251 = 4 (Loss of Echo) or 5 (Loss of Clock)
The third parameter has no function and will not be displayed.