Page 32
Examples of other commands you can use are:
/LEVEL (shows current level)
/SPACE (shows current space)
/HEAD (shows current OCM head)
/FLOW (shows current OCM flow)
/TEMPERATURE (shows current temperature)
/CURRENTOUT (show the mA output value)
/CURRENTIN (show the mA input value)
/BACKUP1 (take backup of parameters to area 1)
/BACKUP2 (take backup of parameters to area 2)
/RESTORE1 (restore parameters from area 1)
/RESTORE2 (restore parameters from area 2)
To Next Page
Loading...
