PT Control: Set Pan/Tilt as upward, downward, leftward, rightward, up-left, down-left, up-right, down-right,
Center: Click this icon, the camera will pan/tilt, and then stop at the center.
Up: Click this icon, camera will move up, you can click one by one or hold it to control the movement.
Down: Click this icon, camera will move down, click it step by step or hold on to control the movement
Set Preset: It supports 9 preset positions. First, control the camera to rotate to the special position
you need to set, click Set Preset button it will pop-up a dialog frame choose any number (1-9).
Call Preset: It supports 9 preset positions. If you want to monitor an important area quickly and
precisely, just click Call Preset Position button it will pop-up a dialog frame choose the number, then
the camera will rotate to the preset position automatically.
If you want to use Call Preset, you have to Set Preset first.
NOTE: if you set different positions with a same number, the camera will record the last position setting only.
Cruise: Preset cruise, camera can cruise according to the different presets you set.
To Next Page
Loading...
Need help?
General
