To Next Page
S
Steven BeltranAug 27, 2025
How to fix a 'CASE TAMPER' error on my Pyronix EURO 46 APP Control Panel?
- MMr. Gerald SmithAug 27, 2025
If your Pyronix Control Panel displays 'CASE TAMPER', make sure the tamper switch is fully closed.
How to fix a 'CASE TAMPER' error on my Pyronix EURO 46 APP Control Panel?
If your Pyronix Control Panel displays 'CASE TAMPER', make sure the tamper switch is fully closed.
Why are the Pyronix EURO 46 APP Control Panel keys locked out?
If the Pyronix Control Panel displays 'KEYS LOCKED OUT', it could be due to two main reasons. First, check to ensure that no two devices are using the same address. If you find any overlaps, correct the addressing, then power cycle the system to reinitialize it. Second, too many incorrect key presses might have triggered a 'Code Guessing' lockout. If this is the case, wait 90 seconds for the keypad to be reintroduced to the system.
What does 'BAT CRITICAL' mean on my Pyronix Control Panel?
If the Pyronix Control Panel displays 'BAT CRITICAL', it means the system is protecting the battery from deep discharge damage during an extended mains failure, and the system is about to power down!
General| Zones | 46 |
|---|---|
| Keypads | 4 |
| Power Supply | 230V AC |
| Operating Temperature | -10°C to +40°C |
| Type | Hybrid |
| Communication | GPRS, PSTN, IP |
| Connectivity | Ethernet, GSM |
| Mobile App | Yes |
| Compatibility | Pyronix wireless devices |
| Battery Backup | 12V |
High security wireless alarm system with two-way communication.
Preserves device battery life and notifies of replacement needs.
Utilizes 128-bit encryption and jamming detection for enhanced security.
Explains keyfob LEDs and programmable functions for system control.
Allows control of external devices like gates and lights via the system.
Real-time notifications for events via the HomeControl+ app or SMS.
Details four methods for setting/unsetting: keypad, tag, keyfob, app.
Illustrates how to navigate the panel menus using keypad buttons.
Explains how to respond to menu questions to navigate options.
Activates a chime sound for door openings detected by magnetic contacts.
Describes how to trigger a Hold-Up alarm using specific keypad buttons.
Assigns specific functions to the four keyfob buttons.
Method to prevent accidental keyfob button presses.
Allows immediate system setting after initiating the exit timer.
Covers setting via keypad, tag, app, and keyfob.
Covers unsetting via keypad, tag, app, and keyfob.
Detailed steps for setting/unsetting using a tag and reader LEDs.
Explains using tag readers solely for door access without arming/disarming.
How to use the wireless arming station for system arming/disarming.
Manages external outputs directly from the arming station.
Using SMS commands to set or unset specific system areas.
Commands to exclude inputs during system setting via SMS.
Retrieves system status, area status, and fault information via SMS.
Controls user automation outputs (ON/OFF) using SMS commands.
Updates the system's registered mobile number for SMS using a command.
Configure panel date, time, and daylight saving adjustments.
Activate or deactivate user automation outputs for remote control.
Program user codes, tags, and learn keyfobs for system access.
Access and view system operational history, including alarms and access events.
Steps to access the Master Manager menu using the default code.
Detailed guide for setting the panel's date and time.
Controls the activation/deactivation of user-defined automation outputs.
Allows specific inputs to be omitted during the current setting period.
Process for adding new users, setting their type, and areas.
Options for modifying or removing existing user codes.
Procedure to update the primary Master Manager access code.
Steps to enroll and configure proximity tags for system access.
Configures tag behavior for flexible area selection during system setting.
Process to add and program keyfobs for specific button actions.
Accesses and displays the system's event history from the panel log.
Accesses and displays user access events from the access log.
Sets up app usage, system ID, and password for normal security level.
Manages the 'Always Poll Cloud' setting for continuous app data synchronization.
Sets up app for high security, including complex password generation.
Method to deliver the generated app password key via SMS.
Guides through connecting the alarm panel to a Wi-Fi network.
Manages phone numbers for SMS alarm notifications.
Instructions for testing system detectors by walking through areas.
How to perform a test of the system's siren and strobe.
Controls whether engineer menu requires specific authorization.
Prevents remote setting/unsetting via UDL software.
Prevents remote panel access for uploads and downloads via UDL.
Plays various sounds to demonstrate different system alerts and tones.
Steps to exit the Master Manager menu and return to normal operation.
Section for recording installer details and installation specifics.
Lists and describes wired inputs, their areas, and names.
Lists and describes wireless inputs, their areas, and names.
Details inputs associated with specific keypads and their areas.
Table for associating users with their access credentials.
Configuration details for wired outputs like Bell and Strobe O/P.
Details for user-defined and ZEM module outputs, including timing and actions.
Instructions on proper disposal of electrical products and batteries.
Outlines the warranty terms, conditions, and limitations for Pyronix products.
