Pyronix PCX 46 - H: SMS Commands - Remote Operations; Checking System Status via SMS; Operating User Outputs via SMS; Checking User Output Status via SMS

10
H: SMS Commands (GSM version only) - Continued...
Checking the System Status via SMS text command
Example SMS command send: Description: Example SMS command response:
123456 Status 123456 = User Code. Status Area A Disarmed No Faults
Area B Disarmed No Faults
Area C Disarmed No Faults
Area D Disarmed No Faults
Operating the User Automation Outputs via SMS text commands
Example SMS command send: Description: Example SMS command response:
123456 Output 1 On 123456 = User Code. User Output 1 turns on. OUTPUT1ON
123456OutputGarage-DoorOn 123456=UserCodeoutputGarage-Dooron=Turnsoutputnamedas
Garage-Dooron.
OUTPUTGarage-DoorON
123456OutputGarage-DoorOff 123456=UserCodeoutputGarage-Dooroff=Turnsoutputnamedas
Garage-Dooroff.
OUTPUTGarage-DoorOFF
NOTE: The user automation outputs can be also activated via the keypad or the keyfob.
NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example, Garage Door is not
acceptable. It has to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Changing a Mobile Number via SMS text commands
Example SMS command send: Description: Example SMS command response:
123456 Change 07777888999
07878888999
123456 = User Code. Change number 07777888999 to number
07878888999
CHANGE 07878888999
Checking the User Automation Outputs status via SMS text commands
Example SMS command send: Description: Example SMS command response:
123456 Output 1 Status 123456 = User Code. User Output 1 status check. OUTPUTONorOUPUTOFF
123456OutputGarage-Door
Status
123456=UserCode.OutputGarage-Doorstatuscheck. OUTPUTGarage-DoorONorOUTPUT
Garage-DoorOFF
NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example, Garage Door is not
acceptable. It has to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Start Uploading/Downloading via SMS text command
Example SMS command send: Description: Example SMS command response:
123456 UDL 123456=UserCode.UDL=ThePCX46willmakeanoutgoingdata
connection to the programmed PC1 number.
No response as the panel is already
connected to the PC1
9999 UDL 9999=EngineerCodeUDL=ThePCX46willmakeanoutgoingdata
connection to the programmed PC1 number.
NO Response as the panel is already
connected to the PC1