To Next Page

To Previous Page

H: SMS Commands (GSM V9.2 or above only)

IfyouhavepurchasedthePCX46GSMmodem(Digi-GSM),itwillallowyoutosendthefollowingSMScommandsviaamobilephone:Arm/disarmthe

system,bypassinputs,checksystemstatus,operateuserautomationoutputs,andchangingamobilenumber.

NOTE:AnytextmessagecommandtothePCX46willneedtostartwithavalidusercodeandalsoamobilenumbershouldbeprogrammed.

NOTE:Textmessagescommandsarenotcasesensitiveexceptwhentheusedoutputsareactivated.

NOTE:IfatextmessagescommandsisnotrecognisedbyPCX46itwillsendbacktotheuserthewrongcommand.

Arming via SMS text command

Example SMS command send: Description: Example SMS command response:

123456 Arm A 123456 = User Code. Arm A = Will arm the PCX 46 in Area A. Final Arm; Area A

123456 Arm ABCD 123456 = User Code. Arm ABCD = Will arm the PCX 46 in Area ABCD. Final Arm; Area ABCD

NOTE: If no areas are specied then all areas will arm (default). In ‘One Area’ Mode, the default will be Area A.

Disarming via SMS text command

Example SMS command send: Description: Example SMS command response:

123456 Disarm A 123456 = User Code. Disarm A = Will disarm Area A. Disarm; Area A

123456 Disarm ABCD 123456 = User Code. Disarm ABCD = Will disarm the Area ABCD. Disarm; Area ABCD

NOTE: If no areas are specied then all areas will disarm (default). In ‘One Area’ mode, the default will be Area A.

Arming with inputs bypassed via SMS text command

Example SMS command send: Description: Example SMS command response:

123456 Arm A Bypass 4 123456 = User Code. Arm A Bypass 4 = Arms Area A and will bypass input

number 4.

Input Bypass; Area A Input 04

Force Arm: Area A

123456 Arm A Bypass Kitchen 123456 = User Code. Arm A Bypass Kitchen = Arms Area A and will bypass

the input that is called Kitchen.

Input Bypass; Area A Kitchen

Force Arm: Area A

Bypassing inputs via SMS text command

Example SMS command send: Description: Example SMS command response:

123456 Bypass 6 123456=UserCode.Bypass6=Inthenextarmingprocedure,input

number 6 will be bypassed.

Input Bypass; Area A Input 06

123456 Bypass Garage 123456=UserCode.BypassGarage=Inthenextarmingprocedure,the

input called Garage will be bypassed.

Input Bypass; Area A Garage

NOTE: The name of the output has to be one word and spelled exactly as written in the panel. For example, Garage Door is not acceptable.

It has to be written as Garage-Door in the panel and the respective command will be Garage-Door.

Pyronix PCX 46 User Manual

Other manuals for Pyronix PCX 46