To Next Page

To Previous Page

NOTE: Pressing the A key will exit the master manager menu from any main menu option above.

*ThesefeaturesareneededtoquicklysetupthePCX46.

NOTE: Make sure you change the default master user code (1234).

M: Master Manager Menu Options

Bypass Inputs Disablesanysensor(input)onthesystemforthecurrentArmperiod.Thisfeaturealsodisablestamperalarms.NOTE:

Inputs programmed as Entry Delay and PA cannot be bypassed.

Operate User Outputs Activates/deactivatesuserautomationoutputsthatareusedtoactivateremotelythedevicessuchaselectronicgates,lights

etc.

*Date & Time Programmes the date and time and enables the summertime automatic adjustment.

*Learn User Codes

Keyfobs & Tags

Programmestheusercodes,tagsandlearnskeyfobs(ifthePCX-RIX32-WEisinstalled)tothePCX46.

Review Log The‘ReviewLogs’functionisusedtoviewalloperationalinformationofthealarmsystem,suchasarming/disarming

information,accesscontrolandalarmactivationsetc.

SMS Phonebook IfSMStextingisenabled,therewillbeupto25mobilenumbersthatcanbeprogrammedtosendSMSalarms.Please

discussthisfeaturewithyourinstallerifrequired.

Walk Test The‘WalkTest’functionallowsthetestingofallprogrammedinputsonthealarmsystem.

Bell Test Thisfunctionisusedtoteststheexternalsiren(wiredandwireless)andstrobe.

PC Connect Menu Thecontrolpanelmaybedialledinto,andprogramminginformationkeptonaPCusingtheInSiteUDLsoftware.This

functionallowsthecontrolpaneltodialaPre-programmedPCtelephonenumber(programmedbyyourengineer).Thisis

usually used by your engineer during a maintenance call.

Allow Engineer Menu Ifthisfunctionisenabled,theengineerwillrequireauthorisationfromyoubeforetheycanaccesstheengineermenu.

Check Credit Checks the credit level of the SIM Card installed on the PCX 46 GSM modem only

Block Remote Arming Blocks any attempt at arming the system remotely via the upload/download software

Block UDL Blocks any attempt at dialling into the system remotely via the upload/download software

Exit Manager Mode Exits the Manager Mode

Pyronix PCX 46 User Manual

Other manuals for Pyronix PCX 46