Pyronix PCX 46 - J: Chime Feature; Chime Feature Usage; Chime Warning for Wireless Detectors; K: Personal Attack From Keypad

12
Thechimefeaturecanbeusedondoor
contactstoenablea‘chime’soundwhen
a door (input) is opened for example. It
may used on any input on the system.
Thisfeaturecanbesetupbyyour
installer.
Todisablethechimeonthekeypad,
closealldoorsandwhen‘c’isdisplayed,
press the ckey,acapital‘C’will
bedisplayed,thiswillthenactivate
the chime on any additional keypads
installed. If you wish to disable the
chime altogether press the c key
again.
NOTE: If using wireless movement
detectors on the system it is not
recommended to have chime enabled
for these detectors as this will drain the
battery.
IfaPAalarmisneeded,pressandhold
both the 1 and 7 keys or hold p
for3secondsanda‘PA’alarmwillbe
generated.
Note:ThePAfacilityneedstobeenabled
by your engineer (either silent or audible
alarm option)
Please note that the keyfob can also be
programmed to support a PA alarm.
Please discuss this with your engineer.
Ifarealarmisneeded,pressandhold
ffor3secondsanda‘re’alarmwillbe
generated.
Note:TheFirealarmkeyneedtobe
enabled by your engineer.
J: Chime Feature
K: Personal Attack From Keypad L: Fire Alarm From Keypad
PCX 46
Time 4:40am c
Alarm Silenced
Keypad PA
Alarm Silenced
Keypad Fire