QNAP TS-h3088XU-RP User Manual

3. Installation and Configuration
This chapter provides specific hardware and firmware installation and configuration steps.
Hardware Installation
This section provides information on removing or installing drives, memory modules, expansion cards, power
supply units, fans, rail kits, and expansion units.
Installing 2.5-inch Solid-State Drives
Warning
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
Important
• This device only supports drives with a maximum height of 15mm.
• For the list of compatible drive models, go to https://www.qnap.com/compatibility.
1. Power off the NAS.
2. Remove the drive tray.
a. Pull the handle to release the tray.
b. Pull the tray out.
TS-h3088XU-RP User Guide
Installation and Configuration 13

QNAP TS-h3088XU-RP Specifications

General

Brand	QNAP
Model	TS-h3088XU-RP
Category	Storage
Language	English