QNAP TS-h3088XU-RP User Manual

2. Product Overview
This chapter provides basic information about the QNAP device.
About the TS-h3088XU-RP
Powered by an Intel® Xeon® W processor, the all-flash TS-h3088XU-RP is designed to deliver a scalable
platform for enterprise-level solutions. Featuring 30 SATA drive bays, this ZFS NAS supports inline data
deduplication and compression, 65536 snapshots, and real-time SnapSync, a disaster recovery solution that
enables you to automatically back up data from one NAS to another. The TS-h3088XU-RP is ideal for I/O-
intensive and latency-sensitive applications, satisfying performance demands in virtualization, data centers,
and mission-critical tasks.
Hardware Specifications
Warning
• If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
• QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
• For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Ordering P/N CPU Memory Power supply
TS-h3088XU-RP-W1250-32G Intel® Xeon® W-1250 32 GB Redundant
TS-h3088XU-RP-W1270-64G Intel® Xeon® W-1270 64 GB Redundant
Component TS-h3088XU-RP-W1250-32G TS-h3088XU-RP-W1270-64G
Processor
CPU Intel® Xeon® W-1250 Intel® Xeon® W-1270
Frequency 6-core/12-thread 3.3 GHz base/4.7 GHz
turbo
8-core/16-thread 3.4 GHz base/5.0 GHz
turbo
Architecture x86 64-bit
Encryption engine AES-NI
Memory
Pre-installed
memory
32 GB RAM: 2 x 16 GB UDIMM DDR4
ECC
64 GB RAM: 4 x 16 GB UDIMM DDR4
ECC
TS-h3088XU-RP User Guide
Product Overview 4

QNAP TS-h3088XU-RP Specifications

General

Brand	QNAP
Model	TS-h3088XU-RP
Category	Storage
Language	English