5. Connect the power cord to the PSU and the electrical outlet.
6. Power on the storage controller.
7. Enable alerts for PSU failures.
a. Log on to QuTS hero as administrator.
b. Go to Control Panel > System > Hardware > General .
c. Select Enable Redundant Power Supply Mode.
d. Click Apply.
Replacing Fans
The fan unit of the device contains three fans to ensure adequate cooling.
Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
TS-h3088XU-RP User Guide
Installation and Configuration 24
To Next Page
Loading...
