QNAP TS-h3088XU-RP User Manual

Warning
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power off the device.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove the case cover from the rear half of the device.
a. Loosen the screws.
b. Lift the cover off the device.
5. Remove an existing module.
a. Push the retention clips outward simultaneously to release the module.
b. Verify that the module has tilted upward and is completely released from the slot.
TS-h3088XU-RP User Guide
Installation and Configuration 16

QNAP TS-h3088XU-RP Specifications

General

Brand	QNAP
Model	TS-h3088XU-RP
Category	Storage
Language	English