LED Status Description
LAN Orange The network connection is operating.
Note
The LAN LED can only detect the device՚s
in-built Ethernet port connections. It cannot
detect network expansion cards՚ Ethernet
port connection status.
Flashes orange The device is being accessed from the network.
Off The device is not connected to a network.
Expansion Orange An expansion unit is connected.
Off No expansion unit has been detected.
Drive Activity Flashes red The data is being accessed and a read/write error occurs
during the process.
Red A drive read/write error occurred.
Flashes green Data is being accessed.
Green The drive is ready.
Off No drive was detected.
Drive Status Green The drive is ready.
Red A drive read/write error occurred.
Flashes red 5 times per
second
The drive is being located in the operating system.
Off No drive was detected.
2.5 Gigabit
Speed LAN
Green The network connection is operating at 2.5 Gbps.
Orange The network connection is operating at 1 Gbps or 100
Mbps.
Off • The network connection is operating at 10 Mbps.
• There is no network connection.
2.5 Gigabit
Activity LAN
Orange A network connection has been established.
Flashes orange The device is being accessed from the network.
Off There is no network connection.
25 Gigabit
Ethernet speed
Green The network connection is operating at 25 Gbps.
Orange The network connection is operating at below 25 Gbps.
Off There is no network connection.
25 Gigabit
Ethernet activity
Orange A network connection has been established.
Flashes orange Data is being transmitted.
Off There is no network connection.
TS-h3088XU-RP User Guide
Basic Operations 44
To Next Page
Loading...
