Replacing Memory Modules
The TVS-x72XT has two memory slots. You can increase the memory capacity of the NAS by upgrading
the memory modules. When using two modules, use only QNAP modules of the same type and
capacity to maintain system performance and stability. You can purchase QNAP memory modules
from authorized resellers.
Warning
• Only qualied personnel should perform the following steps. Failure to follow
instructions can result in serious injury or death.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
•
Moving fan blades: Keep your hands and other body parts away from moving fan
blades.
•
Other moving components: Keep your hands and other body parts away from other
moving components.
1. Power o the NAS.
2. Disconnect the power cord from the electrical outlet.
3. Disconnect all cables and external attachments.
4. Remove each drive tray from the NAS.
a. Slide the lock down.
b. Pull the tray handle outward.
TVS-x72XT User Guide
Installation and Conguration 39
To Next Page
Loading...
