2. Product Overview
This chapter provides basic information about the QNAP TVS-x72XT NAS.
About the TVS-x72XT
The TVS-x72XT is a high-performance NAS powered by an Intel® processor and supports up to 16
GB of DDR4 memory. It features an HDMI port for external displays and a USB One Touch Copy port
for quick and convenient backup and data transfer. In addition to its three network ports (two 1GbE
and one 10GbE), the TVS-x72XT is equipped with two Thunderbolt™ 3 ports (through its PCIe 3.0 x16
slot) that provide a wide range of possibilities, including extra data management capabilities and
additional multimedia support.
Hardware Specications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized modications
and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Ordering P/N CPU Pre-installed memory
TVS-472XT-PT-4G Intel® Pentium® Series 4 GB RAM: 2 x 2 GB SODIMM DDR4
TVS-472XT-i3-4G Intel® Core™ i3 Series 4 GB RAM: 2 x 2 GB SODIMM DDR4
TVS-472XT-i5-4G Intel® Core™ i5 Series 4 GB RAM: 2 x 2 GB SODIMM DDR4
TVS-672XT-i3-8G Intel® Core™ i3 Series 8 GB RAM: 2 x 4 GB SODIMM DDR4
TVS-672XT-i5-8G Intel® Core™ i5 Series 8 GB RAM: 2 x 4 GB SODIMM DDR4
TVS-872XT-i3-8G Intel® Core™ i3 Series 8 GB RAM: 2 x 8 GB SODIMM DDR4
TVS-872XT-i5-16G Intel® Core™ i5 Series 16 GB RAM: 2 x 4 GB SODIMM DDR4
TVS-872XT-i7-16G Intel® Core™ i7 Series 16 GB RAM: 2 x 8 GB SODIMM DDR4
Component TVS-472XT TVS-672XT TVS-872XT
Ordering Information
TVS-x72XT User Guide
Product Overview 6