d. Under the destination, click .
A dialog box opens.
e. Select a folder.
f. Click OK.
g. Optional: Add more paired folders if necessary.
11. Click Next.
The Schedule screen appears.
12. Select Sync now.
13. Click Next.
The Rules screen appears.
14. Optional: Congure job rules.
15. Click Next.
The Summary screen appears.
16. Review the job summary.
17. Click Create.
The source NAS runs the created one-way sync job.
Note
It may take several minutes to migrate shared folders from the source NAS to the
destination NAS.
Importing Local Users or Group Settings to the Destination
NAS
1. Power on the source NAS.
2. Back up the users or group settings from the source NAS.
a. Log on to QTS.
b. Go to Control Panel > Privilege > Users.
c. Click Create, and then click Import/Export Users.
The Import/Export Users window appears.
d. Select Export user and user group settings.
e. Click Next.
The NAS user and user group settings are exported as a le and downloaded onto your
computer.
3. Import user settings on the source NAS to the destination NAS.
a. On the destination NAS, log on to QTS.
TVS-x72XT User Guide
NAS Migration 66
To Next Page
Loading...
