QNAP TVS-672XT - Page 63

Data and Settings After NAS Migration
Encrypted disk
volumes
If the NAS does not support le system encryption, encrypted disk
volumes are not migrated.
Warning
To prevent data loss, back up and save the encryption keys of
encrypted disk volumes in a safe place. You can also choose to
decrypt disk volumes before migration.
Shared folders All shared folders and the downloaded les stored in them are retained.
Warning
To prevent data loss, back up and save encryption keys or passwords
of encrypted shared folders in a safe place before migration.
Important
Folder permissions on the destination NAS must be recongured
after migration.
Network • If the number of network ports or network port specications on
the destination NAS is dierent from the source NAS, the following
network and virtual settings may change and require reconguration:
port trunking, virtual machines, Thunderbolt, USB QuickAccess, and
more.
• You must recongure network settings when the source NAS is
running on QTS 4.3.5 or earlier versions.
Windows AD
conguration
Windows AD congurations must be recongured.
Licenses Licenses are not migrated.
Warning
To prevent losing all your software licenses, QNAP recommends
deactivating licenses on the source NAS before data migration.
Applications If the destination NAS has less RAM than the source NAS, the following
features and applications might not function: Virtualization Station,
Qsirch, and Snapshots.
Services Only services supported by the destination NAS are available.
TVS-x72XT User Guide
NAS Migration 62