BCR license types
There are two BCR license types:
• Basic
• Advanced
BCR basic license
For the BCR basic license the following functions are available:
• Page N of M: defines when a document set is complete and must be inserted into
an envelope. As long as N is below M, the document set is not complete. As soon as
N=M, the set is complete and will be inserted into an envelope.
• Insert/Accumulate: defines when a document set is complete and must be inserted
into an envelope.
At least one basic commands is required. Page N of M can be used in combination with
Customer ID as an integrity check to prevent different document sets to be inserted into
one envelope.
BCR advanced license
For the BCR advanced license the following functions are supported:
• The basic functions (Page N of M, insert/accumulate).
• Sheet sequence - Every sheet has a number, regardless of the document set it is
part of. If a sheet is missing, an error is generated.
• Group sequence - Every document in a set has the same group number. If one
document set is missing, an error is generated.
• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating
error (INS-RE1-000 Reading stop - Stop mark read).
• Selective feed - If the system reads the command, an enclosure from the enclosure
feeder is added to the set.
• Sealing control - Determines if envelopes are sealed or not.
114
| Page 114 | Jul-11-2022 07:45 | Reading
8
English
To Next Page
Loading...
