Flex Reading Code Description
With "Flex reading" also non-standard codes and alternative document handling algorithms
can be recognized. Flex reading can be activated by a system specific license code and
by a customer specific setting that is saved in a physical dongle.
With Flex three types of reading can be supported:
• OMR
• BCR 1D
• BCR 2D
Depending on the license up to 9 Flex definitions can be used on the system.
Creating a Flex job is similar like creating a OMR / BCR reading job.
Create Jobs with Reading
Create a BCR Job
To create a job with BCR:
From the Job list, tap [New job].1.
2. Choose [Manual] to define the job settings.
3. Select an envelope.
4. Tap [Main document].
5. Tap [Settings] in Custom (document) to create a custom document.
6. Enter the document size or select a standard type.
7. Tap the [Reading] tab.
8. Select one of the pre-defined BCR code definitions from the pull down menu (code
definitions have been programmed by your supervisor or by the service engineer).
118
| Page 118 | Jul-11-2022 07:45 | Reading
8
English
To Next Page
Loading...
