Create a Job with Custom Documents
Makes sure that your custom documents fit within the specifications
(see Document Specifications on page 143).
Create a manual job as explained in Create a Manual job on page 30 and select a
custom document as your main document or enclosure.
1.
2. Tap [Settings] in Custom (document) to create a custom document.
3. Enter the height of the document.
4. Confirm the custom document settings with [ā].
5. Complete the Fold Settings and Exit Settings to complete the job settings. In the job
overview tap [Save] to save the job.
Follow the instructions as described in 'Create a test mail set' on page 42.
52
| Page 52 | Jul-11-2022 07:45 | Working with Jobs
4
English
To Next Page
Loading...
