2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen, starts motors and prints the label
automatically.
If you inadvertently remove more than one item from the WP,
replace removed items on WP before weight stabilization to
avoid printing label (about 1.5 seconds).
3. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No.
When sealer is activated, collect the mail piece stack in the catch
tray and put stack aside to let envelopes dry.
In other modes (Manual Weight Entry , no weight ...):
From the [Normal] home screen:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
If a mail piece is bigger than mail path maximum thickness,
press to print a label. The label is printed. To know the
maximum thickness, see Mail Specifications on page 225.
48
| Page 48 | Jul-31-2018 12:32 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
