Quantum DXi6900

Chapter 7: Status
Hardware
Quantum DXi6900 User’s Guide 173
Status The status of the component.
Normal - (Green) The component is operating correctly.
Attention - (Yellow) There is a problem with the component.
Failed - (Red) The component has failed.
HostBusAdapters
The HostBusAdapters page allows you to view information about installed Fibre Channel or SAS cards
and their ports.
To access the HostBusAdapters page, on the Details page, click the HostBusAdapters tab (see
Figure 108 below).
Figure108:Host Bus Adapters Page
The HostBusAdapters section displays the following information about each Fibre Channel or SAS card:
Component The name of the Fibre Channel and/or SAS card.
Click the name of the card to view detailed information for the card below.
Status The status of the Fibre Channel or SAS card.
l Normal - (Green) The component is operating correctly.
l Attention - (Yellow) There is a problem with the component.
l Failed - (Red) The component has failed.
The FibreChannelController or SASHBA section displays the following information about the ports in
the selected Fibre Channel or SAS controller:
Component The number of the Fibre Channel or SAS port.