Quantum DXi6900

Chapter 9: Configuration
VTL Configuration
Quantum DXi6900 User’s Guide 221
To access the PartitionsSummary page, on the Partitions page, click the Summary tab (see Figure 142
below).
Figure142:Partitions Summary Page
Tasks
Use the PartitionsSummary page to perform the following tasks:
l View information about existing VTL partitions (see Partition List below).
l Add a new VTL partition to the system (see Adding a VTL Partition on the next page).
l Edit properties for an existing VTL partition (see Partitions on the previous page).
l Delete a VTL partition from the system (see Partitions on the previous page).
l Change the mode of a partition (see Changing Partition Mode on page 229).
PartitionList
The PartitionList section displays the following information for all VTL partitions on the DXi6900:
AvailablePartitions The number of partitions that have been added to the system and the maximum
number of partitions that can be added.
AvailableVirtualTape
Drives
The number of virtual tape drives that have been added to the system and the
maximum number of drives that can be added.