Quantum DXi6900

Chapter 9: Configuration
Notifications
Quantum DXi6900 User’s Guide 298
EditingaDestination
Edit an SNMP destination to change the name of the destination or the types of traps the DXi6900 sends to
the destination.
To edit a destination:
1. Click Edit.
The EditTrapDestination page displays (see Figure 185 below).
Figure185:Edit Trap Destination Page
2. Enter information about the destination:
Note:If you are editing a destination, you cannot change the IPAddress.
IPAddress (Optional) Select a different destination to edit.
Name Enter the name of the destination.