Quantum DXi6900

Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide 306
Note:Before configuring the network, work with your network administrator to determine the network
settings that will be required to properly integrate the DXi6900 with your company’s network.
ConfiguringGeneralNetworkSettings
Under General, enter the following network information as provided by your network administrator (see
Figure 190 below):
Figure190:Network Page: General
AdditionalInformation
l When entering IP addresses, never use an address that is in a reserved IP address range. To see a
list of reserved IP address ranges, click the quick tip icon [?] located near the IP address field.
l The DNSSuffixSearchList and DNSIPAddresses cannot be modified if the DXi6900 is currently
joined to a Windows domain. To disjoin a Windows domain, see .
Hostname The hostname of the DXi6900.
The Hostname cannot be blank and must contain only letters
[ A–Z, a–z ], numbers [ 0–9 ], and hyphens [ - ].
DefaultGateway The default gateway IP address.
Specifying a default gateway is optional if all access is local to a particular
subnet. For example, if the DXi6900 and all of its clients are on the same
subnet, you do not need to specify a default gateway.
Caution:Specifying a default gateway is required to enable
connectivity with all subnets other than those that the DXi6900 is
directly connected to. For example, if the DXi6900 and its clients are
on different subnets, or you are using an external NTP server, you
must specify a default gateway.