Quantum DXi6900

Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide 325
c. Edit the Alias name.
Note:The key cannot be modified. To remove a key, see Delete an Alias Name below.
d. Click Apply.
The "Successfully performed Security action" message appears.
e. Click OK.
The updated key appears in the AvailableSSHPublicKeys table.
DeleteanAliasName
a. Select the check box next to the public key in the AvailableSSHPublicKeys table.
b. Click Delete.
The DeletePublicKey page displays (see Figure 203 below).
Figure203:Delete Public Key Page
c. Click Yes.
The "Successfully performed Security action" message appears.
d. Click OK.
The key is removed in the AvailableSSHPublicKeys table.
3. In addition to configuring SSH authentication, the CLI Administrator and view accounts may also be
configured with password authentication.
l Select the Allowloginwithpassword check box to enable a password on a CLI Administrator or
CLI Viewer account
l Clear the Allowloginwithpassword check box to disable a password on a CLI Administrator or
CLI Viewer account
Enter the following information:
NewPassword Enter the new password.
ConfirmNewPassword Enter the new password again to confirm it.