Quantum DXi6900

Chapter 9: Configuration
System
Quantum DXi6900 User’s Guide 334
MonitorGroup Enter a distinguished name or common name for the monitor users
allowed on the DXi system. One one group (Monitor or Admin) is required
for LDAP/AD configuration.
Example - cn=user,ou=Group,dc=mycompany,dc=com
Note:OpenLDAP servers require the Slapo-MemberOf overlay
to be installed on the server. Refer to http://manpages.courier-
mta.org/htmlman5/slapo-memberof.5.html for more information on
the overlay.
AdminGroup Enter a distinguished name or common name for the admin users allowed
on the DXi system. One one group (Monitor or Admin) is required for
LDAP/AD configuration.
Example - cn=sysadmin,ou=Group,dc=mycompany,dc=com
Note:OpenLDAP servers require the Slapo-MemberOf overlay
to be installed on the server. Refer to http://manpages.courier-
mta.org/htmlman5/slapo-memberof.5.html for more information on
the overlay.
4. (Recommended) Test the LDAP/AD settings before applying the settings to the DXi system (see Test
LDAP/AD Settings on the next page).
5. (Recommended) Test LDAP/AD usernames and passwords before applying the LDAP/AD settings to
the DXi system (see Test LDAP/AD User on the next page).
6. Click Apply. Changes to LDAP/AD settings forces a log out of the DXi system. Click Yes to continue.
Figure210:LDAP/AD Change Confirmation
DisableLDAP/AD
De-select the EnableLDAP/AD check box to disable LDAP/AD on the DXi6900 system. The LDAP/AD
settings remain saved.