Quantum DXi6900 - Page 375

Chapter 10: Utilities
Software Upgrades
Quantum DXi6900 User’s Guide 375
Figure241:Software Upgrade Utility
Tasks
Use the SoftwareUpgradeUtility to perform the following tasks:
l Configure the DXi6900 to automatically check for software upgrades (see Automatically Checking for
Upgrades below).
l Manually check for software upgrades (see Manually Checking for Upgrades on the next page).
l Download and install available software upgrades (see Downloading and Installing Upgrades on the
next page).
AutomaticallyCheckingforUpgrades
The DXi6900 can automatically check for available software upgrades on a daily basis. If a software
upgrade is found, you will be notified by an admin alert as well as by a Quick Tip icon on the Home page,
next to the current software version (see Figure 242 on the next page).
On the SoftwareUpgradeUtility, select the Checkdailyforsoftwareupgrades check box to enable
automatic upgrade checking. Automatic upgrade checking is enabled by default. To disable automatic
upgrade checking, clear the Checkdailyforsoftwareupgrades check box (not recommended).